Datcon DT4260 Series Operating Instructions Manual page 24

During code writing


 
,
During setting













Display minimum-
maximum value
(▲ button)



Limit display




24
Code? (Code) - type in the code!
Bad code (Bad Code)
A User login took place (User), A Supervisor login took
place (Supervisor)
The typed number is lower than allowed (Low Limit)
The typed number is higher than allowed (High Limit)
Low numeric value not possible to display
High numeric value not possible to display
Re-type it please (Re-type)
Automatic escaping (Auto Escape) - over 4 minutes
Exit from the setting (Exit)
Calculations is in progress, please wait (Busy)
The requested operation has been completed (Ready)
Error (Error)
The saving settings is in progress (Save)
No, I don't want this menu item (No)
Yes, the menu can be started (Yes)
Minimum value (Minimum)
Maximum value (Maximum)
Firmware version (Firmware)
Both limit outputs are switched off
The limit output No.1 is switched on (Limit 1)
The limit output No.2 is switched on (Limit 2)
Both limit outputs are switched on
DT4260 xx xx xx xx
20111006-V020111006