Table of Contents
Advertisement
MODBUS bit/sec setting
Sequence of operations
MODBUS parity setting
Sequence of operations
52
9. Keep stepping by pressing the ▲ button as long as you
see this menu item:
MODBUS bit / seconds rate).
10. Enter the menu item by pressing the ENTER button.
11. You will see:
select Baud rate.
12. Pressing ▲ button you can select from the following
data rates:
•
: (300 = 300 bit / seconds).
•
: (600 = 600 bit / seconds).
•
: (1200 = 1200 bit / seconds).
•
: (2400 = 2400 bit / seconds).
•
: (4800 = 4800 bit / seconds).
•
: (9600 = 9600 bit / seconds). [Factory default]
13. After selecting data rate press MENU button, you will
see:
and the instrument exits from the menu item.
14. Keep stepping by pressing the ▲ button as long as you
see this menu item:
parity).
15. Enter the menu item by pressing the ENTER button.
16. You will see:
pressing ▲ button, you can select the parity.
•
: (Odd = odd).
•
: (None = no parity).
•
: (Even = even). [Factory default]
17. After selecting parity, press MENU button, you will see:
and the instrument exits from the menu item.
(MODBUS Baud Rate =
on the display. Here you can
(MODBUS Parity = MODBUS
(Even = even) on the display. By
DT4260 xx xx xx xx
20111006-V020111006
Advertisement
Table of Contents
