Mounting The Svrs Power Center - Pentair SunTouch Installation And User Manual

Mounting the SVRS Alarm Power Center
The SVRS Alarm Power Center can be mounted on a flat vertical surface, such
as a wall or post.
Note: Select a convenient location to mount the SVRS Alarm
Power Center. DO NOT install the SVRS Power Center enclosure
less five (5) feet from the pool/spa, filter and no further than 15
feet from the pool/spa valve.
To mount the SVRS Alarm Power Center:
1. Position the SVRS Alarm power center against the vertical flat
surface. If wall anchors are being used, support the power center
in position (horizontally level and square) against the surface and
mark the bracket hole pattern on the wall.
2. Secure the power center with three (3) screws in the mounting
bracket holes. If using wall anchors, use 3/16" drill and set the
anchors and secure the enclosure with screws.
Mounting
bracket
SVRS Alarm Power Center Mounting Brackets
SVRS Audible Alarm Installation and User's Guide
15
Mounting
bracket
Mounting
bracket