Firmware Version; Run Factory Test - Pentair SunTouch Installation And User Manual

Total SVRS Event
Count xxx0
SVRS Error Since
Last View xxx0
Total Com Error
Count xxx0
Com Errors Since
Last View xxx0
Clear Errors
Counters No?

Firmware Version

Main Menu [4/5]
Firmware Version

Run Factory Test

Main Menu [5/5]
Run Factory Test
Displays the total SVRS event alarms.
Displays SVRS event alarms since last viewed.
Displays total Communication alarms.
Communication alarms occur when the system is not
communicating with the pump.
Displays Communication alarms since last viewed.
Clear all "Error Counters." Press the Up arrow or
Down arrow button to select "Yes" to clear errors
counters.
To view the firmware version: Press the Menu
button until Main Menu [4/5] is displayed, then press
the Right arrow button to display the current
firmware version. Press the Menu button twice to
return to the main screen.
To run the factory test: Press the Menu button until
Main Menu [5/5] is displayed, then press the Right
arrow button to display the first screen. Press the
Right button to start the system test. Follow the
screen prompts to complete the test. After the test
has been completed, press the Menu button twice
to return to the main screen.
SVRS Audible Alarm Installation and User's Guide
5