Intelliflo Pump Control Panel Buttons And Display Messages; Programming Intelliflo Vs+Svrs Pump - Pentair SunTouch Installation And User Manual

12
Programming the IntelliFlo VS+ SVRS Pump
By setting a start time and a stop time, Speeds 1-8 can be programmed to run a
certain speed at a certain time of day. To run a scheduled pump speed, press the
Start button (LED on). The LCD screen will display "Running Schedules" when
it is ready to run a scheduled speed. If the start button is pressed during a
scheduled speed time the screen will read Running Speed x and will run speed x.
(If priming is enabled it will prime first at the maximum RPM setting of the pump
before running speed x.)
Note: The pump will not run the scheduled speeds until the Start/Stop
button is pressed (LED on) to place the pump in the "Running Schedule"
mode.
To set a schedule to run the pump:
1. Check that the green power LED is on.
2. Press the Menu button. "Settings" is displayed.
3. Use the Up or Down arrow button to scroll to "Speed 1-8".
4. Press the Select button. "Speed 1" is displayed.
5. Use the Up or Down arrow button to choose the speed you wish
to program.
6. Press the Select button. Select Manual, Schedule, or Egg
Timer for speeds 1-4. "Disabled" or "Schedule" for speed 5-8 is
displayed.
Speeds 1-4 default setting is MANUAL. To create a schedule
for speed 1-4 Press Select to highlight manual.
Speeds 5-8 default setting is DISABLED. To create a schedule
for speed 5-8, Press Select to highlight Disabled.
7. Use the Up or Down arrow button to scroll to "Schedule".
8. Press the Enter button.
9. Press the Down arrow button. Set speed will be displayed.
10. Press the Select button to change the speed. The first digit will
highlight (ones digit).
11. Use the Up or Down arrow button to change the speed.
12. Press the Enter button to save the setting.
13. Press the Down arrow button. "Set Start Time" is displayed.
14. Press the Select button to change the start time. The cursor will
highlight the minute column.
SVRS Audible Alarm Installation and User's Guide