Advertisement
CONTROLL MODULE PROGRAM MODIFICATION
Required to make changes to the controller
settings :
-
Android device (e.g. smartphone,
tablet).
Installed from PlayStore 'Flowmatic
-
system' software.
1. Establish Bluetooth connection
− Go to the Bluetooth settings on your device
then scan for devices. Generally, when
scanning the first thing to come up in
available devices will be a Mac address that
looks like this example (AB:EC:69:57:34:02).
This will eventually change to the name of
the device, which is from factory set as
'FlowmaticPB2' (This later can be changed to
a custom name in the app).
−
Select this device.
Version 1, 18 December 2020, Page 7 of 12
2. Entering the pin
-
The device will ask for a pin, which from factory is
'1234'. Enter this in. (This pin can be changed later
in the app.). Your device is now connected to the
controller, and is ready to be adjusted from the
'Flowmatic system' app.
Advertisement
