Advertisement
5. Control module connections
−
We recommended that all cabling is fed
through 25mm conduit to make servicing and
replacment easier.
−
Connect the button leads to the input side of
the control module and the solenoid lead to
the output side.
−
If extension leads are required, please
contact Galvin Specialised.
Do not cut the leads. If the leads are too
long, it is recommended that any excess is
coiled up and clipped to the wall.
Version 1, 18 December 2020, Page 6 of 12
6. Connect power supply and check for correct
operation
−
Connect the module to the GPO and turn on.
−
When the button is pushed water should flow
from the outlet.
−
Check for correct operation.
The connection of this product to mains
power supply should be undertaken by a
competent person and should confirm to local
Wiring Regulation – AS3000 Wiring rules.
Advertisement
