Advertisement
®
Ezy-Drink
Lead Free SS316
45° Push Button
Drinking Bubbler Tap
PRODUCT CODES:
- TD45XP
SPECIFICATIONS
−
The innovative design and 316 Stainless Steel construction ensures there is no risk of lead leaching
into the water from the tapware.
−
Drinking taps are designed to operate at full mains pressure.
−
Rubber and metal mouthguards are designed to help protect teeth when drinking.
−
Rubber mouthguard is resistant to fungal and bacterial attack and has a high resistance to sunlight.
−
Vandal resistant handle.
−
Adjustable built-in flow restrictor.
IMPORTANT: All Ezy-Drink
premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Construction
Finish
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice.
TOOLS REQUIRED
−
Power drill
−
Spanner or adjustable crescent
−
Screw driver
®
push button drinking taps are tested in accordance with AS/NZS 3718 and leave our
Version 1, 15 April 2019, Page 1 of 4
½" BSP - Female
Rubber mouthguard
Push button
Min
50
Max
500
Min
5
Max
60
2
Stainless Steel
Satin
Advertisement
Table of Contents
Related Manuals for Galvin Specialised Ezy-Drink TD45XP
Summary of Contents for Galvin Specialised Ezy-Drink TD45XP
- Page 1 Working Pressure Range (kPa) Working Temperature Range (°C) Nominal Flow Rate (LPM) Construction Stainless Steel Finish Satin NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Power drill − Spanner or adjustable crescent −...
- Page 2 INSTALLATION IMPORTANT: Galvin Specialised products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards. Failing to comply with these provisions shall void the product warranty and may affect the performance of the product.
- Page 3 Version 1, 15 April 2019, Page 3 of 4 TROUBLESHOOTING PROBLEM CAUSE RECTIFICATION Inconsistent flow Blocked top assembly Remove top assembly and clean Water is turned off Turn on water Water is not flowing from tap Blocked flow restrictor Remove restrictor and clean Top assembly loose or internally Remove top assembly, clean with water Continuous flow...
- Page 4 Version 2, 15 April 2019, Page 4 of 4 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.
Need help?
Do you have a question about the Ezy-Drink TD45XP and is the answer not in the manual?
Questions and answers