Mounting Details
Face plate cut out position
Locate push button face plate at a suitable distance from
the pan (we recommend 300mm from the centre of the
outlet and at a suitable height or to project specification)
D)
Component Dimensions
52483- STAINLESS STEEL FACE PLATE ASSEMBLY
300
Version 1, 18 December 2020, Page 3 of 12
Cut out details for face plate
−
Faceplate to suit wall thickness between 30mm to
240mm. Ensure the cut out details are as below and
the wall thickness does not exceed 240mm.
30
52070 - SOLENOID KIT
100