Advertisement
9. Settings for pans.
-
The default configuration for a pan is two
buttons and one or two solenoids. By
marking the 'Link pans' the outputs will
work simultaneously.
-
Chanel 1 is to be used for the half flush and
the channel 2 for full flush.
-
Set the required time and Hygiene flush for
half flush (channel 1) and press 'Upload'.
Similarly set the required time and Hygiene
-
flush for full flush (channel 2) and press
'Upload'.
11. Connection menu.
By pressing the back arrow on Android
-
device, the connection screen will pop up.
-
The buttons allow to rename the
controller, set new PIN, disconnect or go to
setting screen 'Next'.
Version 1, 18 December 2020, Page 10 of 12
10. Settings for shower.
PB2 controller is capable of controlling two buttons
-
and two showers (solenoids).
Select channel to be changed.
-
-
Select desired 'Run time'.
-
Select desired 'Lockout time' if required or set to
"0" if not.
-
Select 'Shower end warning'. Recommended only if
setting a lock out time.
-
Press 'Upload' to store the settings in the
controller.
Advertisement
