Table of Contents
Advertisement
Web Server
Setting
HTTP Server port
Enable Secure Browsing
HTTPS Server port
To configure Web Server Settings:
1. Enter the HTTP Server port number. The default setting is 80.
2. Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and
you must select the HTTPS server port in the next step.
3. Enter the HTTPS server port number. The default setting is 443.
Changing the Web Server settings will reboot the VDP650.
Using the WebUI
VDP650 Administrator and Provisioning Manual
Description
Port used by the HTTP server.
Sets the server to use the HTTPS protocol.
Port used by the HTTPS server.
98
Back to Contents
Advertisement
Table of Contents
