Table of Contents
Advertisement
where:
host is the hostname or IP address of the server supporting the XML application
port is the port number the phones are using for the HTTP request
At the time of the HTTP call, the variable value field is populated with the appropriate data.
For example, the following URL passes the SIP Account User Identifier to the server:
http://10.50.10.140/script.pl?name=$$SIPUSERNAME$$
A GET request then passes along the following information:
http://10.50.10.140/script.pl?name=42512
Assuming that the User Identifier is 42512.
Variable names are defined by the particular XML application being called.
Variable values are predefined and depend on the status of the phone. If the variable has
no meaning in the current status, then the phone sends an empty string.
The table below lists all possible variable values. Note that variables applicable during an
Incoming or Active Call (such as INCOMINGNAME and REMOTENUMBER) are initialised
at the beginning and at the end of the call.
Variable value
SIPUSERNAME
DISPLAYNAME
LOCALIP
INCOMINGNAME
REMOTENUMBER
REGISTRATIONSTATE
MAC
MODEL
Using the WebUI
VDP650 Administrator and Provisioning Manual
Description
SIP Account User Identifier
SIP Account Display Name
Phone's local IP Address
Caller ID name of the current Incoming Call
Remote party phone number (Incoming or Outgoing)
Registration state available from the Registration event.
Values are:
REGISTERED
DEREGISTERED
FAIL
The phone's MAC Address
The phone's model number: VDP650.
60
Back to Contents
Advertisement
Table of Contents
