Table of Contents
Advertisement
KeyLine Assignments
On the KeyLine Assignments page, you can assign accounts to KeyLine numbers.
KeyLine assignments apply to all handsets and desksets registered to the VDP650 SIP
DECT 4-Line base station.
The KeyLine number is displayed on the handset/deskset when you are on a call or
displaying calls in the Call List. The KeyLine number identifies the line number of a call.
Because a maximum of four active SIP sessions are supported across all handsets and
desksets, you should only configure a maximum of four KeyLine assignments.
The factory default is set to Account 1 for Keyline 1 to 4.
Setting
Keyline 1-12
To enable a Key System experience for your phone system, you must configure the line
keys (L1 to L4) for each handset and deskset. Such configuration is available via the phone
user interface (described below), or the configuration file parameters (see
Module: Handset Settings" on page
On the handset/deskset, select MENU > User Settings > Progrm'able key > Line key
Using the WebUI
VDP650 Administrator and Provisioning Manual
Description
Select the account you want to assign to the corresponding
KeyLine number.
Default values (1-4): Account 1, (5-12): N/A
128).
56
""hs_settings"
.
Back to Contents
Advertisement
Table of Contents
