Table of Contents
Advertisement
Setting
Mode
Bootup Check
Schedule Check: Disable
Schedule Check: Interval
Schedule Check:
Days of the Week
Start Hour
End Hour
Use encryption
Passphrase
Using the WebUI
VDP650 Administrator and Provisioning Manual
Description
Sets which files for which the VDP650 checks. It can check
for configuration files, firmware update files (from the URL
entered on the Firmware Server Settings page), or both.
Note: When checking for both configuration and firmware
files, the firmware URL can be within the config file. This
firmware URL takes take precedence over the URL on the
Firmware Server Settings page. It will also update the URL
on the Firmware Server Settings page. This allows you to
change the firmware URL automatically.
Sets the VDP650 to check the provisioning URL for new
configuration and/or firmware files upon bootup. The
update is applied as part of the reboot process.
When selected, disables regularly scheduled file checking.
Sets an interval for checking for updates. After selecting
Interval, enter the interval in minutes between update
checks.
Select to enable weekly checking for updates on one or
more days. After selecting Days of the Week, select the
day(s) on which the VDP650 checks for updates.
Select the hour of the day on which the VDP650 checks for
updates.
Select the hour of the day on which the VDP650 stops
checking for updates.
Enables an AES-encrypted configuration file to be
decrypted before being applied to the VDP650. Select if
the configuration file has been secured using AES
encryption. See
"Securing configuration files with AES
encryption" on page
112.
If the configuration file has been secured using AES
encryption, enter the 16-bit key. See
configuration files with AES encryption" on page
94
"Securing
112.
Back to Contents
Advertisement
Table of Contents
