VTech ErisTerminal VDP650 Administrator And Provisioning Manual page 28

To set other settings (DNS and NTP):
1. From the Network setting menu, press
MENU/SELECT.
2. On the Others menu, with DNS 1 highlighted, press MENU/SELECT.
3. Enter the IP address for the primary DNS server.
Press

Use the dial pad to enter numbers.

4. Press
5. On the Others menu, press
MENU/SELECT.
6. Enter the IP address for the secondary DNS server. The VDP650 uses this server if the
primary server does not respond.
Press

Use the dial pad to enter numbers.

7. Press
8. On the Others menu, press
9. Enter the IP address for the NTP server. If the VDP650 does not use an NTP server,
you must manually enter the time and date settings.
Press

Use the dial pad to enter numbers.

Configuration Using the Phone Menus
to delete numbers.
BACKSPC
SAVE .

or
BACKSPC to delete numbers.
SAVE .

or
to delete numbers.
BACKSPC
28
VDP650 Administrator and Provisioning Manual
 
to highlight Others, and then press
or

to highlight DNS 2, and then press

to highlight NTP, and then press MENU/SELECT.
Back to Contents