Table of Contents
Advertisement
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VDP650 Administrator and Provisioning Manual
sip_account.x.nat_traversal_stun_keep_alive_enable
Enables or disables UDP keep-alives. Keep-alive packets are used to
maintain connections established through NAT.
0 (disabled), 1 (enabled)
sip_account.x.nat_traversal_stun_keep_alive_interval
Sets the interval (in seconds) for sending UDP keep-alives.
0–65535
sip_account.x.keep_alive_enable
Enable SIP keep alive for NAT traversal and monitoring SIP server
status.
0 (disabled), 1 (enabled)
sip_account.x.keep_alive_interval
Sets the interval (in seconds) for sending keep-alives.
1-3600
sip_account.x.keep_alive_ignore_failure
Enable the phone to ignore keep-alive failure, if failure triggers
re-subscription (and calls are dropped).
0 (disabled), 1 (enabled)
sip_account.x.music_on_hold_enable
Enables or disables a hold-reminder tone that a far-end caller hears
when put on hold during a call on account x.
0 (disabled), 1 (enabled)
sip_account.x.sip_session_timer_enable
Enables or disables the SIP session timer.
0 (disabled), 1 (enabled)
122
Default:
1
Default:
30
Default:
0
Default:
15
Default:
0
Default:
1
Default:
0
Back to Contents
Advertisement
Table of Contents
