VTech ErisTerminal VDP650 Administrator And Provisioning Manual page 25

To set static IP for the VDP650:
1. From the Network setting menu, press
press MENU/SELECT.
If DHCP is disabled, the Set static IP menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.
2. On the Set static IP menu, with IP Address highlighted, press MENU/SELECT.
3. Enter the Static IP Address.
Press

Use the dial pad to enter numbers.

To add a period, press the * key.

4. Press
5. On the Set static IP menu, press
MENU/SELECT.
6. Enter the Subnet Mask.
Press

Use the dial pad to enter numbers.

Configuration Using the Phone Menus
to delete numbers.
BACKSPC
SAVE .
to delete numbers.
BACKSPC
25
VDP650 Administrator and Provisioning Manual
 
to highlight Set static IP, and then
or
 
to highlight Subnet Mask, and then press
or
Back to Contents