Table of Contents
Advertisement
2. To install the deskset firmware: Click
Server update page, or
The confirmation dialog box shown below appears.
3. To begin installing the handset/deskset firmware, click
Installing handset firmware. Please wait... appears. To cancel the download,
click
After clicking
appears on the handset/deskset.
After a successful update, the message Firmware installation successful appears on
the WebUI.
An error message appears if:
the handset/deskset firmware is aleady up to date.
the handset/deskset firmware URL is incorrect, or the file cannot be retrieved for
any other reason.
the handset/deskset firmware file is corrupted.
the handset/deskset doesn't recognize the firmware file. For example, the firmware
file may belong to a different ErisTerminal product.
To install the firmware on the cordless handset/deskset:
Your cordless handset/deskset will automtically initiate the firmware update after a
short period of time, as long as there are no active calls on the base station. If you
wish to manually start the firmware update, perform the steps below.
1. On the handset/deskset, press MENU, and then select Admin settings.
Using the WebUI
VDP650 Administrator and Provisioning Manual
.
, the message System update in progress. Please wait...
89
on the Firmware
on the Manual Firmware update page.
. The message
Back to Contents
Advertisement
Table of Contents
