Mac-Specific Configuration File Settings - VTech ErisTerminal VDP650 Administrator And Provisioning Manual

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:

MAC-specific configuration file settings

Setting:
Description:
Values:
Configuration File Parameter Guide
VDP650 Administrator and Provisioning Manual
sip_account.x.call_rejection_response_code
Select the response code for call rejection. This code applies to the
following call rejection cases:
User presses Reject

DND is enabled

Phone rejects a second incoming call with Call Waiting disabled

Phone rejects an anonymous call with Anonymous Call Rejection

enabled
Phone rejects call when the maximum number of calls is reached

480, 486, 603
sip_account.x.dtmf_payload_type
Set the configurable RTP payload type for in-call DTMF.
96-127
sip_account.x.use_register_route_header
Use Route header for REGISTER
0 (disabled), 1 (enabled)
sip_account.x.dns_query_option
Select DNS query option for SIP traffic only:
0 (DNS query with A record only)
1 (DNS query with NAPTR/SRV/A)
DNS query for all other traffic (e.g. HTTP) should always perform
A record only.
0, 1
sip_account.x.sip_account_enable
Enables account x to be used by the device.
0 (disabled), 1 (enabled)
124
for an incoming call
Default: 486
Default: 101
Default: 1
Default: 1
Default: 0
Back to Contents