Table of Contents
Advertisement
Using the Network Setting menu
Use the Network setting menu to configure network-related settings for the VDP650. For
more information about these settings, see
"Advanced Network Settings" on page
To use the Network setting menu:
1. From the Admin Settings menu, press
then press MENU/SELECT.
The Network setting menu appears.
2. Press
Network setting
DHCP
Set static IP
VLAN ID
Others
BACK
DHCP
Set static IP
VLAN ID
Others (DNS and NTP servers).
To enable or disable DHCP:
1. From the Network setting menu, press
MENU/SELECT.
The DHCP screen appears.
2. Press
DHCP is enabled by default, which means the VDP650 will get its IP address from the
network. When DHCP is disabled, you must enter a static IP address for the VDP650.
Configuration Using the Phone Menus
or
to highlight the desired option, and then press MENU/SELECT:
ENTER
to select Enabled or Disabled, and then press
or
You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
VDP650 Administrator and Provisioning Manual
"Basic Network Settings" on page 65
67.
to highlight Network setting, and
or
to highlight DHCP, and then press
or
24
and
SET
.
Back to Contents
Advertisement
Table of Contents
