Table of Contents
Advertisement
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VDP650 Administrator and Provisioning Manual
sip_account.x.mwi_enable
Enables or disables message waiting indicator subscription for account x.
Enable if SUBSCRIBE and NOTIFY methods are used for MWI.
0 (disabled), 1 (enabled)
sip_account.x.mwi_subscription_expires
Sets the MWI subscription expiry time (in seconds) for account x.
15–65535
sip_account.x.mwi_ignore_unsolicited
Enables or disables ignoring of unsolicited MWI notifications—
notifications in addition to, or instead of, SUBSCRIBE and NOTIFY
methods—for account x. Disable if MWI service is configured on the
voicemail server and does not involve a subscription to a voicemail
server.
0 (disabled), 1 (enabled)
sip_account.x.nat_traversal_stun_enable
Enables or disables STUN (Simple Traversal of UDP through NATs) for
account x. STUN enables clients, each behind a firewall, to establish
calls via a service provider hosted outside of either local network.
0 (disabled), 1 (enabled)
sip_account.x.nat_traversal_stun_server_address
Sets the STUN server IP address.
IPv4, IPv6 or FQDN
sip_account.x.nat_traversal_stun_server_port
Sets the STUN server port.
1–65535
121
Default:
0
Default:
3600
Default:
0
Default:
0
Default:
Blank
Default:
3478
Back to Contents
Advertisement
Table of Contents
