Basic Network Settings - VTech ErisTerminal VDP650 Administrator And Provisioning Manual

Basic Network Settings

You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
Basic Network Settings
Click the link for each setting to see the matching configuration file parameter in
Module: Network Settings" on page
IPv4
Setting
Disable
DHCP
Using the WebUI
VDP650 Administrator and Provisioning Manual
135. Default values and ranges are listed there.
Description
Disables all related IPv4 settings.
DHCP is selected (enabled) by default, which means the
VDP650 will get its IP address, Subnet Mask, Gateway, and
DNS Server(s) from the network. When DHCP is disabled,
you must enter a static IP address for the VDP650, as well
as addresses for the Subnet Mask, Gateway, and DNS
Server(s).
65
""network"
Back to Contents