Transport - Siemens SIMEAS R-PMU Manual

14
14.1 Getting Started
14.1.4

Transport

Transport the SIMEAS R-PMU only in its original packaging or in another appropriate packaging.
The packaging materials must ensure protection against shock and impact, as well as against
electrostatic charge (ESDS measures).
Make sure that no objects or fluids can enter the device during transportation. This especially
goes for the interface connectors.
Condensation may occur when the device is brought from a cold environment into the operating
room. Wait at least for two hours until the device has adjusted its temperature and is absolutely
dry before putting it into operation.
CAUTION
Caution with defective devices with transport damage.
Nonobservance of the safety instructions means that moderately severe or slight inju-
ries can occur.
•
Devices that have been damaged during transport must not, under any circumstances, be
connected and put into service.
Note
Please bear in mind that such measures apply both for complete devices and individual modules.
186
Digital Fault Recorder, SIMEAS R-PMU, Manual
E50417-H1076-C360-A5, Release 10.2012