Remote Log - Huawei WA1003A-RU User Manual

User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Table 3-4 System Function Description
Save All
Restart
Restart AP
Restore

3.13.4 Remote Log

Us the Remote Log menu to set up logging to servers or
computers that are located outside the LAN or subnet of the
WA1003A-RU.
In order to save the configuration changes you have just
made they must be saved to the WA1003A-RU's
non-volatile RAM by clicking on the Save All button.
Click the Restart button to restart the WA1003A-RU. If you
have not saved your changes, the WA1003A-RU will revert
to the previously saved configuration upon rebooting the
WA1003A-RU.
Click to restart the Wireless AP (Access Point). The
Wireless AP must be restarted any time wireless
configuration is changed.
The WA1003A-RU can be reset to the default configuration
for all settings using the Restore option. This will also
change the both the LAN and WAN IP address of the
device, so these will need to be reconfigured accordingly.
To perform a factory reset, click the Restore button. Since
the IP settings will return to their default, you will lose access
to the Web Manager. To use the Web Manager interface,
the LAN IP address will need to be reconfigured.
3-68
Chapter 3 Configuring