Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
3.10.10 Dynamic Routing
The WA1003A-RU supports RIP v1 and RIP v2 used to share
routing tables with other Layer 3 routing devices. It also supports use
of password protection which requires password verification for RIP
requests. Use the Dynamic Routing menu to enable RIP and if desired
to configure password protection.
Figure 3-37 Dynamic Routing (RIP) menu
To enable RIP v1, check Enable RIP, select RIP v1 Protocol,
select the Direction (In, Out, or Both), and click Apply. To enable RIP
v2 or RIP v1 Compatible, select the appropriate Protocol and
Direction and click Apply. To use password protection for RIP v2 or
RIP v1 Compatible protocols, check Enable Password, enter a
Password, and click Apply.
Chapter 3 Configuring
3-62
Advertisement
Table of Contents
