Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Figure 3-28 LAN Clients Setup
To add a static IP address to the list of available IP addresses,
type an IP address that falls within the range a available IP addresses
and click on the Add button. In the example above, available
addresses range from 10.0.0.1 to 10.255.255.254. Any addresses
added will appear in the list of Static Addresses available for
advanced configuration. These addresses can then be used in the
other Port Forwarding, Access Control and Advanced Security menus.
To delete an IP address from the list of Static Addresses, click the
Delete box for the address or addresses you want to eliminate and
click on the Apply button.
Dynamically assigned IP addresses may be reserved so that the
lease does not expire for the LAN IP address. Click the Reserve box
for the address or addresses you want to reserve and click the Apply
button. These addresses will become Static IP addresses and will no
longer be available for DHCP assignment.
Chapter 3 Configuring
3-48
Advertisement
Table of Contents
