Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Figure 3-12 Modem Setup menu (change modulation type)
If you are instructed by your ISP to change the Modulation type is
used for your service, select the desired modulation type and then
click Apply. The modulation types available are T1413, G.DMT,
GLITE and MMODE. By default, the WA1003A-RU will automatically
detect the modulation used; this setting is listed as MMODE
(Multi-mode).
3.4.5 Configure Connection 1 for PPPoA
PPP or Point-to-Point protocol is a standard method of
establishing a network connection/session between networked
devices. Different forms of PPP include PPPoA and PPPoE
(discussed below) involve an authentication process that requires a
username and password to gain access to the network. PPPoA (PPP
over ATM) as described in RFC 2364, is a method of using PPP on an
Chapter 3 Configuring
3-21
Advertisement
Table of Contents
