Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
the previously discussed PPPoA and both menus are nearly identical.
It may be worthwhile for the user to change the default name of
Connection 1 to something that states what connection type is being
used, for example, WAN_PPPoA, the name used in the example
below. Notice the VPI and VCI values are included in the name. It is
not functionally necessary to change the name of the connection, this
is done merely to provide descriptive reference.
Figure 3-14 Setup – Configure Connection 1 for PPPoE
To configure Connection 1 for PPPoE, follow the steps listed
below. Some of the settings do not need to be changed the first time
the device is set up, but can be changed later if you choose.
1. Click the Connection 1 button under WAN Setup to view the
default PPPoA Connection Setup configuration menu.
2. Select PPPoE from the Type: pull-down menu. The menu will
blink momentarily
Chapter 3 Configuring
3-25
Advertisement
Table of Contents
