Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Figure 3-32 Access Control menu
Remember, if the client IP address you want does not appear
listed in the LAN IP pull-down menu, click on the New IP button to go
to the LAN Clients menu.
To block all traffic from the WAN port to a specific IP address,
select the LAN IP address to block and click to check the Traffic Type
__ Any selection box, then click the Apply button. This will block all
traffic from the WAN port to the specified client.
Remember to save the configuration changes.
Access Control pre-configured rules are the same as for port
forwarding:
Chapter 3 Configuring
3-54
Advertisement
Table of Contents
