Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
3.10.9 Static Routing
Use Static Routing to specify a route used for data traffic within
your Ethernet LAN or to route data on the WAN. This is used to specify
that all packets destined for a particular network or subnet use a
predetermined gateway.
Figure 3-36 Static Routing menu
To add a static route, choose a connection from the pull-down
menu and then enter a New Destination IP address, subnet Mask,
Gateway IP address and Metric value. Click Apply to enter the new
static route in the table below. The route becomes active immediately
upon creation.
To remove a static route from the table in the bottom half of the
window, choose to Delete it from the table and click the Apply button.
Remember to save the configuration changes.
Chapter 3 Configuring
3-61
Advertisement
Table of Contents
