Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
Figure 3-18 Setup – Configure Connection 1 for CLIP (IPoA)
To configure the WAN connection for CLIP, perform the steps
listed below. Some of the settings do not need to be changed when
you first set up the device but can be changed later if you choose.
1. Click the Connection 1 button under WAN Setup to view the
default PPPoA Connection Setup configuration menu.
2. Select CLIP from the Type: pull-down menu. This action will
change the menu so it offers different settings for
configuration.
3. Type in a Name: in the space provided (WAN_PPPoA is used
in the above example).
4. Under Options, enable NAT and/or Firewall by selecting the
appropriate checkbox. This option is not available for a Bridge
connection.
Chapter 3 Configuring
3-35
Advertisement
Table of Contents
