Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
3. Type in a Name: for the connection or use the default name in
the space provided (WAN_PPPoA used in the above
example).
4. Under Options, enable NAT and/or Firewall by selecting the
corresponding selection box.
5. If you are told to change the VPI or VCI values, type in the
values given to you by your service provider. Many users will
be able to use the default settings.
6. Leave the default QoS values if you are unsure or the ISP did
not provide this information.
7. Do not change the PCR or SCR values unless you are
required to do so. If you are told to change these, type in the
values given to you by your service provider.
8. Type the Username and Password used to verify the identity
of your account. Typically, the Username is an account
number assigned by your ISP and appears in the form
account#@serviceprovider.com, while the Password may
have been chosen by the account holder. For most users, the
remaining settings will not need to be changed. See your ISP
for further information.
9. Click the Apply button when you have entered all the
information. The web browser will briefly go blank. You are
now finished changing setting for the primary WAN
connection known as Connection 1. It is now necessary to
save the changes you just made and restart the
WA1003A-RU.
Chapter 3 Configuring
3-26
Advertisement
Table of Contents
