Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
To bring up the WEP configuration window, click the WEP radio
button.
Figure 3-9 WEP configuration window
From the drop-down menu, select an Authentication Type: Open,
Shared, or Both.
Select a key by clicking a radio button on the left, select an
encryption level from the drop-down menu on the right, then enter the
proper-length key. (Key length is outlined at the bottom of the window.)
Click Apply.
Note:
If encryption of any kind, at any level is applied to the WA1003A-RU, all devices on
the network must comply with all security measures.
Chapter 3 Configuring
3-16
Advertisement
Table of Contents
