Manual Phone Configuration; Wi-Fi Profile Configuration; Add The Phone To A Broadcasted Wi-Fi Network - Cisco Webex 840 Manual

Manual Phone Configuration

Procedure
Step 1
Press and hold the Power button until the phone vibrates and the first screen displays.
Step 2 On the startup screen, quickly tap the display 6 times.
Step 3
Scan a QR code.
Related Topics
Manual Phone Configuration
If you don't use an Enterprise Mobility Management (EMM) application and QR code to configure the phones,
you can manually configure the phones.

Wi-Fi Profile Configuration

For an out of box or factory reset phone, you configure the Wi-Fi network through the startup wizard or select
Set up offline. How you configure the phone offline depends on whether the Wi-Fi network is either:
• Broadcasted
• Nonbroadcast or hidden

Add the Phone to a Broadcasted Wi-Fi Network

You add the phone to a broadcasted Wi-Fi network through the startup wizard, or offline through the Settings
app.
Before you begin
Get the following information about the Wi-Fi network from your administrator:
• Network name or Service Set Identifier (SSID)
• Network security mode:
• PIN or passkey for the security mode, if you use one
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
58
Cisco App Package Names, on page 83
• None
• Pre-shared key (PSK)
• Protected Extensible Authentication Protocol (PEAP)
• Extensible Authentication Protocol (EAP) Transport Layer Security (EAP-TLS)
• EAP Tunneled Transport Layer Security (EAP-TTLS)
Phone Configuration