User Restriction Settings In The Custom Settings App - Cisco Webex 840 Manual

Cisco App Configuration
Note This is an OEMConfig app. To configure the app, your Enterprise Mobility Management (EMM) must support
the OEMConfig enhanced schema. If required, consult with your EMM support for assistance.
Related Topics

User Restriction Settings in the Custom Settings App

By default, all the user restrictions are on, which means that users can control these settings on their phones.
If you don't want users to control certain settings, you can change these settings to Off.
User Restriction Settings for Wi-Fi and Airplane Mode
The following table describes the user restriction settings that are related to Wi-Fi and airplane mode.
Table 59: Settings for Wi-Fi and Airplane Mode
Field
Allow Wi-Fi toggle
Allow airplane
mode toggle
User Restriction Settings for Quick Settings Tiles
The following table describes the user restriction settings that are related to the quick settings tiles.
Table 60: Settings for Quick Settings Tiles
Field
Allow quick settings
tiles
Access the Cisco App Settings on the
Field Type Or
Choices
On
Off
On
Off
Field Type or
Choices
On
Off
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
User Restriction Settings in the Custom Settings App
Phone, on page 65
Default Description
On If enabled, and if the Allow quick settings
tiles is enabled, the user can enable or
disable Wi-Fi from the quick settings tiles.
If the Allow quick settings tiles is
disabled, all the quick settings tiles are not
available.
On If enabled, and if the Allow quick settings
tiles is enabled, the user can enable or
disable Airplane mode from the quick
settings tiles.
If the Allow quick settings tiles is
disabled, the Airplane mode quick settings
tile is not available.
Default Description
On If enabled, all enabled quick setting tiles
are accessible to the end user.
If disabled, all quick setting tiles are
inaccessible to the end user.
103