Cisco Webex 840 Manual page 101

Cisco App Configuration
Field
Enable check ISBT
table
ISTB concatenation
redundancy
The following table describes the default settings for the Matrix 2 of 5 symbology.
Table 42: Matrix 2 of 5
Field
Enable Matrix 2 of
5
Enable Matrix 2 of
5 check digit
Enable transmit
Matrix 2 of 5 check
digit
The following table describes the default settings for the Micro PDF symbology.
Table 43: Micro PDF
Field
Enable Micro PDF
The following table describes the default settings for the Micro QR symbology.
Table 44: Micro QR
Field
Enable Micro QR
The following table describes the default settings for the MSI Plessey symbology.
Field Types Or
Choices
On
Off
2 to 20
Field Type Or
Choices
On
Off
On
Off
On
Off
Field Type Or
Choices
On
Off
Field Type Or
Choices
On
Off
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
Default Description
ON If you enable ISBT Concatenation, enable
Check ISBT Table to concatenate only
those pairs found in this table.
10 With ISBT Concatenation set to
Autodiscriminate, this option sets the
number of times the device must decode
an ISBT symbol before determining that
there is no additional symbol.
Default Description
ON Enables or disables the symbology.
OFF
OFF Enables or disables transmit.
Default Description
ON Enables or disables the symbology.
Default Description
ON Enables or disables the symbology.
Default Settings for the Barcode App
93