Actions For Advanced Data Formatting - Cisco Webex 840 Manual

Actions for Advanced Data Formatting

Table 56: ScanFlex Settings
Field
Application or
activity name(s)
Symbology settings
for application(s)
entered above
Format data
Advanced data
formatting
Related Topics
Actions for Advanced Data Formatting
In the ScanFlex Advanced data formatting settings, you can set the scanner to perform up to ten different
Actions on a scanned string. You can set the Actions to happen in any order, and you may repeat an Action
if needed.
Each Action has two parameters that are associated with it: Parameter 1 and Parameter 2. The parameter fields
may not be necessary for some actions.
The following table describes actions that move the cursor.
Table 57: Actions That Move the Cursor
Action
Move forward
Move back
Move to beginning
Move to end
Move to beginning of sub-string
Move to the end of sub-string
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
100
Field Type Or
Choices
String
Default Settings for the Barcode
Default
App, on page 86
Cursor Action Description
Move the cursor forward by n
spots.
Move the cursor backward by n
spots.
Move the cursor to the beginning
of the string.
Move the cursor to the end of the
string.
Move the cursor to the beginning
of a sub-string.
Move the cursor to the end of a
sub-string.
Cisco App Configuration
Description
Enter a name for the application or activity.
If more than one name, use a comma to
separate names.
Set desired symbology settings for the
application or activity.
Select desired symbologies, and set their
data manipulation and custom intent
settings.
Select desired symbologies, and set custom
actions and parameters.
Directions for Parameters
Enter n in Parameter 1.
Enter n in Parameter 1.
No parameter required.
No parameter required.
Enter the sub-string in Parameter
1.
Enter the sub-string in Parameter
1.