Emergency Call Settings; Emergency Tone Settings - Cisco Webex 840 Manual

Cisco App Configuration
Option
Incapacitation panic alarm with an
emergency phone call

Emergency Call Settings

You can configure the Panic Button to place an emergency call when the user activates the Panic Button. By
default, the emergency call is disabled.
Use the following settings to configure emergency calls.
Table 13: Emergency Call Settings
Field
Emergency call
Emergency dial
force speaker
Emergency dial
number
Related Topics

Emergency Tone Settings

You can set the emergency warning and alarm tones from the list of available phone ringtones.
Use the following settings to configure the emergency tones.
Field Type Or
Choices
On
Off
On
Off
Any valid TN
911
Access the Cisco App Settings on the
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
Description
Allows an incapacitated user to
place an emergency call.
An incapacitated user may not be
able to hold the phone to their ear.
To ensure that both parties can hear
the phone call audio, set the alarm
to be silent and turn on the forced
speakerphone option.
Default
Off
On
911
Phone, on page 65
Emergency Call Settings
Settings
Set the Panic button silent alarm
to On.
Set the Emergency call to On.
Set the Emergency dial force
speaker to On.
Description
Enables the phone to call the emergency
number configured in Emergency dial
number, if the user triggers the Panic
Button or an Emergency motion alarm.
Enables the speakerphone when the phone
places an emergency call. This setting
allows the user to be in handsfree mode in
case they can't hold the phone to their ear.
Defines the number that the phone dials
when the user triggers the Panic Button or
an Emergency motion alarm.
You must configure and enable the other
related settings for the emergency call to
occur.
Follow any dial plan rules when you enter
the emergency dial number.
71