Charge Your Spare 860 Batteries With Desktop Battery Charger - Cisco Webex 840 Manual

Charge Your Spare 860 Batteries with Desktop Battery Charger

Charge Your Spare 860 Batteries with Desktop Battery Charger
You can charge up to two spare 860 batteries at a time in the Webex Wireless Phone 860 Desktop Battery
Charger Module.
Caution You cannot use this charger for 840 batteries.
There are two LEDs: one for each battery. The LEDs turn on when you properly seat the batteries.
• A solid red LED indicates that the item is charging.
• A solid green LED indicates that the item is fully charged.
• An LED that is off indicates an empty slot or an error condition.
Before you begin
Ensure that you properly set up the Webex Wireless Phone 860 Desktop Battery Charger Module.
Caution
Use only the approved chargers and power supplies for your phone.
Procedure
With the battery charging contacts facing down, insert a spare battery into each charger slot.
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
132
Accessories