Add The Phone Extension - Cisco Webex 840 Manual

Cisco Unified Communications Manager Phone Configuration

Add the Phone Extension

For release 1.2(0) or older, the phone supports a single line only, which can't be a shared line.
For release 1.3(0) or newer, the phone supports up to six lines, including shared lines.
At a minimum, configure the following fields on the Directory Number Configuration window. If required
by your site policies and procedures for new extension provisioning, you may need to configure more fields.
Before you begin
Add the phone.
Procedure
Step 1
From the Cisco Unified Communications Manager Administration Phone Configuration page, click Line [1]
Add a new DN.
Step 2 In the Directory Number Information section, set the following:
• Directory Number—Enter the Extension number, or Directory Number for the phone.
• Description—Enter a description for this particular Directory Number.
• Alerting Name—Enter a name that displays to callers.
• ASCII Alerting Name—Enter the same name from the Alerting Name field.
Step 3 In the Directory Number Settings section, set the following:
• Voice Mail Profile—If this Directory Number uses voicemail, select a profile that directs callers to the
• Calling Search Space—Select a Calling Search Space with partitions that include any numbers you may
Step 4 In the Call Forward and Call Pickup Settings section, set the Call Forward Settings as desired for your
environment. For example, you can configure Call Forward for all unavailable, no answer, or busy scenarios
to forward calls to the Cisco Unity Connection Voicemail server. Or you may also specify a different, unique
call forward Destination.
Caution
Step 5
In the Line 1 on Device section, set the following:
• Display—Enter the name to present to internal called parties.
• ASCII Display—Enter the same name from the Display field.
Step 6 In the Multiple Call/Call Waiting Settings on Device section, set the following:
• Maximum Number of Calls—Enter 4. Four calls are the maximum number of calls the phone can place
voicemail pilot number. For example, select the Cisco_Unity_Connection_Profile.
dial from this line.
If Cisco Unified Communications Manager is using Partitions and Calling Search Spaces, we
recommend that you configure the Call Forward Calling Search Spaces. Failure to configure a
Call Forward Calling Search Space may result in call forward failures.
or receive per registration.
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
Add the Phone Extension
45