Emergency App And Panic Button Training; Push To Talk App - Cisco Webex 840 Manual

Emergency App and Panic Button Training

Table 14: Emergency Tone Settings
Field
Warning tone
Alarm tone
Related Topics
Emergency App and Panic Button Training
Ensure that you train your users about how to use the Emergency app and Panic Button within your
organization. Use the following list as a guide:
• Monitoring
• Panic Button

Push to Talk App

The Push to Talk (PTT) app is a radio multicast app, where the phones can operate in a group broadcast mode,
like walkie-talkies.
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
72
Field Type Or
Choices
Default notification
sound
None
List of available
warning tones
Default alarm sound
None
List of available
alarm tones
Access the Cisco App Settings on the
• Which motion detection sensors are active? What is the degree of sensitivity? What is the timeout?
How long is the warning state?
• What happens when an alarm is triggered? Is there an emergency call? Is there an external security
application, and if so, what does it do?
• Is the Snooze option configured? If so, for how long?
• How do you activate the Panic Button? With a long press, two short presses, or either?
• If you press the Panic Button, will the phone place an emergency call?
• If you press the Panic Button, will it sound an alarm through the speakerphone?
• If the phone places an emergency call, does the audio come through the speakerphone?
Default Description
Default (Pixie Dust) Configures the tone to play during a
warning period. This tone plays at a
gradually increasing volume. Tones play
even if the user silences the handset.
Note
Default (Cesium) Configures the tone to play when a Panic
Button press or Emergency alarm triggers.
This tone plays at a high volume. Tones
play even if the user silences the handset.
Phone, on page 65
Cisco App Configuration
There is no warning period for
the Panic Button; it goes
straight to the alarm state.