Cisco Unified Communications Manager Phone Configuration; Determine The Mac Address Of The Phone; Install Manufacturing Ca Certificates - Cisco Webex 840 Manual

Cisco Unified Communications Manager Phone
Configuration
•
•
•
•
•

Determine the MAC Address of the Phone

To add a phone to the Cisco Unified Communications Manager (Unified Communications Manager), you
need the media access control or MAC address of the phone.
Note The phone's MAC address is also printed on the outside of the phone's box.
Procedure
Perform one of the following actions:
• On the phone, access the Settings app, select System > About Phone > Status, and look in the Wi-Fi
• Remove the battery from the phone, and look at the label in the battery compartment of the phone.

Install Manufacturing CA Certificates

The phones use a new manufacturing certificate authority (CA). Until Cisco Unified Communications Manager
(Unified Communications Manager) includes these new certificates, you must manually add the new root and
intermediate certificates to the certificate chain to trust the new Manufacturing Installed Certificates (MIC).
Determine the MAC Address of the Phone, on page 37
Install Manufacturing CA Certificates, on page 37
Before You Register Wireless Phones, on page 38
Manual Phone Registration, on page 42
Phone Feature Configuration, on page 46
MAC Address field.
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
3
C H A P T E R
37