Add The Phone - Cisco Webex 840 Manual

Cisco Unified Communications Manager Phone Configuration
• Password—Enter a password for this user that complies with your system and account policies. If your
• Confirm Password—Repeat the password.
• (Optional) Self Service-User ID—Use the extension number for the device.
• (Optional) Pin—Enter a pin to let the end user use pin enabled features such as user web login.
• Confirm Pin—Repeat the pin.
• Last Name—Enter the User's last name.
• First Name—Enter the User's first name.
• Digest Credentials—Enter the Digest Authentication Password that you would like the phone to use to
• Confirm Digest Credentials—Repeat the Digest Authentication Password.
Note
Step 4
Click Save.

Add the Phone

Before the phone can be used, you add it to the Cisco Unified Communications Manager (Unified
Communications Manager) and assign it to a user.
Before you begin
Install the following files on the Unified Communications Manager:
• Latest device enabler QED installer Cisco Options Package (COP) file
• Latest phone software COP file
Get the MAC address of the phone.
Procedure
Step 1 From the Cisco Unified Communications Manager Administration web page, select Device > Phone.
Step 2
Click Add New.
Step 3 Select the phone model:
Cisco 840
Cisco 860
Step 4 Click Next.
Step 5 In the Device Information section, set the following minimal phone information:
system is LDAP integrated, this field is dimmed and unavailable. In this case, you can create or modify
this password through the Active Directory Server.
register.
Enter other End User field values as required by your site's system and account policies.
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
Add the Phone
43