Appendix B System Specifications - Supero SUPERSERVER 6028TR-DTR User Manual

Table of Contents

Advertisement

Appendix B: System Specifications
Appendix B
System Specifications
Note: Unless noted specifications apply to a complete system (all serverboards).
Processors
Two E5-2600 series processors per node in Socket R LGA 2011 type sockets
Note: please refer to our website for details on supported processors.
Chipset
One C612 chipset per node
BIOS
16 Mb AMI BIOS® Flash EEPROM per node
Memory Capacity
Each node has up to eight (8) DIMM slots supporting up to
256 GB of DDR4-2133/1866/1600 MHz registered ECC SDRAM in
512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size sizes of 1.5V or 1.35V
voltages.
Note: refer to Section 5-6 for details on installation.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory support
information.
Hard Drive Bays
Twelve hot-swap drive bays to house twelve standard SAS/SATA drives
PCI Expansion
One RSC-R2UT-3E8R risr card for each node to support three standard size PCI
Express x8 cards
Serverboard
X10DRT-H serverboard (proprietary form factor)
Dimensions: (LxW) 6.8 x 16.64 in. (172.72 x 422.66 mm)
B-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 6028tr-d72r

Table of Contents