Table of Contents
Advertisement
SUPERSERVER 6028TR-DTR/D72R USER'S MANUAL
Fan Headers
This serverboard has one system
fan header (Fan 3). This 4-pin fans
header is backward compatible with
traditional 3-pin fans. However, fan
speed control is available for 4-pin fans
only. The fan speed is controlled by
Thermal Management via the IPMI 2.0
interface. See the table on the right for
pin definitions.
DOM Power Connector
A power connector for SATA DOM (Disk
On Module) devices is located at JSD1
and JDS2. Connect an appropriate cable
here to provide power for your SATA
DOM devices.
SATA DOM + Power Conection
A SATA DOM with power-pin is located
at S-SATA0 and S-SATA1. Install a
SATA device here to use onboard SATA
connections, which are supported by the
Intel PCH.
TPM Header/Port 80
A Trusted Platform Module/Port 80
header is located at JTPM1 to provide
TPM support and Port 80 connection.
Use this header to enhance system
performance and data security. See the
table on the right for pin definitions.
Pin Definitions
Pin#
1
2
3
4
Pin Definitions
Pin#
1
2
3
TPM/Port 80 Header
Pin Definitions
Pin #
Definition
1
LCLK
3
LFRAME#
5
LRESET#
7
LAD 3
9
+3.3V
11
LAD0
13
SMB_CLK
15
+3V_DUAL
17
GND
19
LPCPD#
5-16
Fan Header
Definition
Ground
+12V
Tachometer
PWR Modulation
DOM PWR
Definition
+5V
Ground
Ground
Pin #
Definition
2
GND
4
<(KEY)>
6
+5V (X)
8
LAD 2
10
LAD1
12
GND
14
SMB_DAT
16
SERIRQ
18
CLKRUN# (X)
20
LDRQ# (X)
Advertisement
Table of Contents
