Supero SUPERSERVER 6028TR-DTR User Manual page 67

I C Bus for VRM
2
Jumpers JVRM1 and JVRM2 allow the
BMC or the PCH to access CPU and
memory VRM controllers. See the table
on the right for jumper settings.
Manufacturing Mode Select
Close pin 2 and pin 3 of Jumper JPME2
to bypass SPI flash security and force the
system to operate in the Manufacturing
mode, allowing the user to flash the
system firmware from a host server for
system setting modifications. See the
table on the right for jumper settings.
Chapter 5: Advanced Serverboard Setup
I C Bus for VRM
2
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
ME Mode Select
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
5-19
Definition
Enabled
Disabled
Definition
Disabled
Manufacturing Mode