Table of Contents
Advertisement
Appendix C: System Specifications
Appendix C
System Specifications
Processors
®
Single Intel Pentium
4 478-pin microPGA processors of up to 3.06
GHz at a 533/400 MHz system bus speed
Memory Capacity
2 DIMM slots to support a maximum of 2 GB unbuffered, non-ECC
PC2700/2100 (DDR-333/266) low-profile SDRAM
DIMM Sizes
128 MB / 256 MB / 512 MB 1 GB 184-pin modules supported
SCSI Controller (5013G-6 only)
Adaptec AIC-7899 for dual channel Ultra160 SCSI
SCSI Backplane Controller (5013G-6 only)
SCA backplane for two (2) SCA hot-swap SCSI drives
Main Drive Bays
5013G-6: Two (2) drive bays to house two (2) standard 1" 80-pin
SCA SCSI drives
5013G-i: Two (2) drive bays to house two (2) 3.5 x 1" IDE disk drives
Peripheral Bays
One (1) 3.5" floppy drive
One (1) slim CD-ROM drive
PCI Expansion Slots
One (1) 32-bit 33 MHz (5V) PCI slot (bundled with a 32-bit, 33 MHz 5V
riser card)
Power Supply
Type: 1 x 250W with +3.3V, +5V, +12V, -5V and -12V main DC
outputs and a 5V standby output.
Input Voltage: 100-240VAC (w/ ± 10% tolerance - units are auto-
switching capable)
Fans: Two 4-cm ball bearing fans
C-1
Advertisement
Table of Contents
