Table of Contents
Advertisement
Appendix D: System Specifications
Appendix D
System Specifications
Processors
One 370-pin Intel Pentium III FCPGA 500 MHz - 1.26+ GHz or one
Celeron FCPGA/PPGA 333 - 866 MHz CPU with a 133 or 100 MHz FSB
Memory Capacity
3 DIMM slots to support a maximum of 512 MB SDRAM
DIMM Sizes
128 MB / 256 MB / 512 MB 168-pin SDRAM modules supported
SCSI Controller (5011H only)
Adaptec AIC-7899 for dual channel Ultra160 SCSI
SCSI Backplane Controller (5011H only)
SCA backplane for two (2) SCA hot-swap SCSI drives
Main Drive Bays
5011H: Two (2) drive bays to house two (2) standard 1" 80-pin SCA
SCSI drives
5011E: Two (2) drive bays to house two (2) 3.5 x 1" IDE disk drives
Peripheral Bays
One (1) 3.5" floppy drive
One (1) slim CD-ROM drive
PCI Expansion Slot
Four (4) onboard 32-bit 33 MHz (5V) PCI slots (bundled with a 32-bit,
33 MHz 5V riser card)
Power Supply
Type: 1 x 200W with +3.3V, +5V, +12V, -5V and -12V main DC
outputs and a 5V standby output.
Input Voltage: 100-240VAC (w/ ± 10% tolerance - units are auto-
switching capable)
Fans: Two 4-cm ball bearing fans
Operating Temperature Range: 0 to 40 degrees C
D-1
Advertisement
Table of Contents
