Expansion Card/Expansion Slot Setup; Installing The Riser Card Onto The Riser Card Bracket - Supero SUPERSERVER 6028TR-DTR User Manual

SUPERSERVER 6028TR-DTR/D72R USER'S MANUAL

Expansion Card/Expansion Slot Setup

The 6028TR-DTR/D72R includes one preinstalled riser card per node, designed
specifically for use in a 2U rackmount chassis. This riser card (RSC-R2UT-3E8R)
supports three standard size PCI Express x8 cards for each node.

Installing the Riser Card onto the Riser Card Bracket

Installing the Riser Card onto the Riser Card Bracket (Figure 6-12)
1. Disconnect the power supply and lay the chassis on a flat surface.
2. Pull the serverboard node drawer from the chassis.
3. Remove the riser card bracket.
3a. Remove the screw securing the riser card bracket to the back of the
drawer.
3b. Lift the bracket out of the serverboard node drawer.
4. Align the riser card mounting hole to the bracket standoff and secure the riser
card to the bracket using the two screws included in the accessory box.
Add-on Card
Bracket
Add-on Card
Bracket Screws
Figure 6-12. Installing an Add-On Card
PCI Slot
Shield
6-16
Add-on Card
Riser Card