SUPERSERVER 6028TR-DTR/D72R User's Manual
Removing the Protective Film
Before operating the server for the first time, it is important to remove the protec-
tive film covering the top of the chassis, in order to allow for proper ventilation and
cooling.
Removing the Protective Film
1. Peel off the protective film covering the top cover and the top of the chassis
2. Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
1
1
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Warning: do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.
Figure 2-1: Removing the Protective Film
Check Ventilation
Openings
1
2
2-4